How to boot into safe mode in windows 10 and 11

Windows 10

Safe Mode is useful for troubleshooting Windows. This section describes how to boot in Safe Mode on Windows 10 and 11 operating systems.

Safe Mode allows you to boot your system with the minimum number of processes and drivers required. This allows you to pinpoint problems with Windows as well as maintenance. If a problem cannot be found or reproduced in Windows Standalone Mode , the problem may be caused by a non-essential third-party service, process, or program. In addition, Safe Mode can also remove problematic disks and applications without difficulty.

For example, if you have just installed a driver and are experiencing BSOD errors, you can safely remove that driver by booting into Safe Mode .

In general, Windows Safe Mode is a useful feature and you should know how to activate it.

There are various ways to enter Safe Mode in Windows. No matter which method you use to boot, you will get the same result: booting into Safe Mode. To make it easier, we have listed five ways to boot into Safe Mode. The first three methods work if you are able to boot the system normally. The last two methods are useful if Windows is unable to boot normally.

Follow the method selected for your use case.


The following steps work the same in Windows 10 and 11.

Shift + click to enter Safe Mode

Shift + click to boot in Safe Mode. This is one of the easiest ways to access Windows Safe Mode.

To enter Safe Mode, right click on the Start Menu icon, hold down the Shift key on your keyboard and select “Shutdown or Sign Out > Restart”. Now select “Troubleshooting > Advanced Options > Startup Settings > Restart”. Then press “4” when prompted. This will force Windows to start in Safe Mode.

Once you have finished using Safe Mode, reboot the system. The system will boot normally.

Safe Mode in Settings App

The Settings App provides several options for managing Windows, including reset and booting in Safe Mode. To enter Safe Mode from the Settings app, use the “Advanced Recovery” option. Here are the simple steps to follow.

1. First, Open the “Settings” app . You can use the “Start + I” shortcut or find it in the Start menu.

2. In Windows 10, go to the ” Update & Security -> Restore ” page. Click the “Restart Now” button on the “Advanced Startup” tab in the right pane.

For Windows 11, go to the ” Settings > Windows Update > Restore ” page and click ” Restart ” next to “Advanced Startup”.

3. The above will restart the system and bring you to the Advanced Startup page. Now select ” Troubleshooting “.

4. Select ” Advanced Options “.

5. Now select ” Startup Settings “.

6. Click the ” Restart ” button.

7. Windows will restart again and a list of startup options will appear. Press the number “4” on the keyboard to start in Safe Mode. As soon as you do so, the system will reboot and enter Safe Mode.

Safe Mode with MSConfig Tool

You can also use the MSConfig Tool to access Windows Safe Mode. If necessary, you can also perform a clean boot using the MS Config Tool. This method is useful if you wish to boot repeatedly in Safe Mode.

1. Press Win+R to display the “Run” dialog box. Then type ” msconfig” ” and press ” Ok ” to start the MS Config tool.

2. In the new window, select the “Boot” tab. Select the ” Safe Mode ” checkbox and click the ” Ok ” button.

3. Reboot the system normally and it will boot in Safe Mode.

4. When you are done using Safe Mode, simply check ” Safe Mode ” and reboot the system. Safe Mode will exit. If you do not do this, the system will start in Safe Mode each time you reboot.

Suspend the boot process 3 times

If you are unable to boot Windows, the easiest way to access Safe Mode is to interrupt the boot process. Specifically, the boot process must be interrupted three times. This built-in WindoanismWindows will trigger the Recovery or Advanced Boot screen when the boot process is interrupted three times.

Once the computer boots, simply shut it down, attempt to boot it again, and shut it down.

Now select “Troubleshooting > Advanced Options > Startup Settings” and click the “Restart” button. After rebooting, click “4” to boot in safe mode

Boot in safe mode using the USB installation drive

If you have a Windows installation drive, you can also use it to access safe mode

1. First, click Plug in the Windows installation drive and boot.

2. On the installation screen, click the “Next” button.

3. On the next screen, select the “Repair your computer” link.

4. The above steps will bring up the “Advanced Startup” page. Here, select the ” Troubleshooting ” link.

5. Select “Command Prompt” on the “Advanced Startup” page.

6. In the Command Prompt window, execute the following command.


bcdedit /set {default} safeboot minimal

7. Reboot the system and it will automatically enter Safe Mode.

IMPORTANT: When you are done using safe mode, run the bcdedit /deletevalue {default} safeboot command to exit safe mode. Otherwise, you will be in safe mode every time you boot your computer.

That’s all. Booting into Safe Mode in Windows 10 and 11 is very easy.

We hope this simple and easy guide to working with Windows has been helpful.

If you get stuck or need help, send us an email and we will do our best to help.

YouTube video: How To Boot Into Safe Mode in Windows 10 and 11

Rate article
We provide high-quality and detailed Windows tutorials